Legend™ Tie-on Laser Labels
The Legend™ polyester laser printable tie-on cable labels are designed to be printed through any ordinary office laser printer with its normal printer cartridge.(using the printer manufacturer’s toner cartridge). No special equipment is needed. Supplied in (pre-perforated) plastic A4 sheets, that can be simply/quickly printed, the labels are then removed from the sheet by folding along the perforations.
Typical applications include; Power Stations, Sub-Stations, Control Rooms, Commercial Buildings, Hotels. Airports, Universities, Data Centres, Rail… Since no special equipment is needed, and with up to 60 labels printed in 20 seconds (the time it takes for the sheet to run through the printer), using this solution is simple and fast.
Tests include: High/Low Temperature, H2S Sour Gas Exposure, Salt Mist Spray according to Lloyds Register Type Approval System. For full list of tests please see Product Datasheet.
We have been manufacturing this family of labels for over 15 years, it has been used and approved by a broad spread of contractors including,
Depending on the size up to 6 different colours available:
Labacus Innovator Lite/Basic/Advanced/Professional & Professional Satellite(for distant site printing of Professional output). Download free trials of Basic/Advanced/professional with FOC Basic software.
Print via any ordinary laser printer.
TIP – TIME INTO PROFIT
- To trial labels, no need to buy software. Download our entry level FOC Lite software (includes 3 days trial FOC of Basic/Advanced/Professional levels).
- To print a few labels – use functionality in Advanced/Professional levels by print labels at bottom of page, so maintaining leading edge of
sheetfor later print runs.
For more information call our Sales Team on
+44 (0)1707 37 37 27 or email email@example.com
PRODUCT CODES EXPLAINED
|Material:||175 micron polyester|
|Tested temperature range:||-40°C to 85°C (-40°F to 185°F)|
|Printing:||Laser printers only|
|London Underground:||Authorised for Use|